Rubber Ribbed Hollow Bulb Seal for RV Slide Out - Press On - 25' Long x 1-3/16" Tall

Video Transcript for Review of etrailer RV Slide Out Parts - 25 Foot Rubber Press On Ribbed Hollow Bulb Seal - CS89VR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this rubber press on RV slide out bulb seal. And you can see, this is a hollow or ribbed bulb seal design. It is going to push on to replace a bulb seal on your RV slide out that may be deteriorating, cracking, that sort of thing. When you're replacing your bulb seal, you're obviously gonna want to make sure that you're getting one that's very similar. So, you can see our measurements for this.

We're looking at about 1 5/8 of an inch wide and the height is kind of difficult to see 'cause it does get a little smashed in shipping but it's approximately 1 3/16 of an inch tall. Now, this does come in three different lengths to meet your application's needs, so we've got a 15-foot-long, a 25-foot-long and a 50-foot-long option available for you. You can find those here at etrailer.com, so make sure you're getting the right length for you. For your frame of reference, the one I have here is the 25-foot-long option, so if that gives you a visual indication of how much you're gonna need for your application. But this is made here in the USA of a EPDM rubber, so it's not going to shrink, crack, or fade over time.

It will hold up really well for you. It's also gonna resist UV damage. So again, it'll last you a nice long time. It'll be very easy to get installed and you can just press this onto a 1/8-inch to 1/4-inch thick flange on your RV's slide out. It's got that flexible core that's gonna help maintain the grip around rounded areas.

You may need to use a rubber mallet to tap it to seal into place but then, when you're all set up, you got all that you need, you can just use scissors to trim off any extra seal. So if you are needing to replace your RV slide out's ribbed hollow bulb seal this is gonna be exactly what you need. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.

.